OTTOFLEX Slurry Seal Coating

Characteristics

  • 1-component, flexible composite sealing
  • Crack-bridging
  • Easy to use
  • Crack-free curing
  • Watertight and permeable to vapour diffusion after curing
  • Frost and ageing resistant after setting
  • Complies with building material class B2 “normally inflammable” in accordance with DIN 4102-1

Fields of application

  • For application in interior and exterior areas
  • Flexible composite sealing under ceramic coverings and natural stone in moisture-prone rooms and wet rooms
  • Flexible composite sealing under ceramic coverings and natural stone on balconies, terraces and arcades (not above used rooms) with a gradient ≥ 1.5 %
  • Construction waterproofing of components which have contact with the earth to protect against ground moisture and non-oppressive water, such as exterior cellar walls and supporting walls
  • For sealing swimming pools and solid water containers for the interior and the exterior, authorised for a water depth of up to 4 m
  • Suitable for substrates which are sufficiently stable such as gypsum plasterboard, gypsum fibre, screed, heated screed, concrete, masonry, cellular concrete and plasters classified by mortar groups II and III
  • In very wet areas conform to stress categories A and B according to abP

Standards and tests

  • General building inspection certificate - Liquid seal in combination with tiles and board coverings for use as building sealant
  • Complies with the water action categories W0-I, W1-I, W2-I and W3-I for tear class R1-I in accordance with DIN 18534
  • Complies with the water action category W1-B for the tear classes R0-B and R1-B for the container sites S1-B and S2-B in accordance with DIN 18535
  • Conform to the stress categories A and B according to AbP
  • Conform to the moisture resistance classes A0 and B0 according to ZDB information sheet
  • Based on the inspections for awarding an AbP in accordance with PG-AIV-F and the resulting areas of application, the following stress categories can be assigned from the ÖNORM B 3407 – W1, W2, W3, W4, W5 (except areas with increased chemical stress) and W6.
  • Watertightness tested in accordance with DIN EN 14891, table 1
  • GISCODE ZP1
  • French VOC-emission class A+

Packaging

20 kg sack
ODS-108
Packaging unit 1
Pieces per pallet 50

Products, packaging Units and/or colours bearing order codes are available ex warehouse in standard commercial quantities.

Ofs Dichtungsschlaemme 02 12 2015