OTTOSEAL S 140 - Teaserbild

OTTOSEAL® S 140

The hotel and spa silicone

1-component silicone sealant based on oxime, neutral cross-linking, MEKO-free
For indoor and outdoor application
  • Double mould protection
  • Extremely resistant to mould and bacteria
  • Very long-lasting joint
  • Compatible with natural stone
Technical datasheet
EMICODE® EC1 PLUS

Product details

The special hotel and spa silicone OTTOSEAL® S 140 is a sealant that was explicitly developed for expansion and connection joints in permanently moist hygiene or swimming pool areas. OTTOSEAL® S 140's greatest strength is its double protection against mould: In addition to the fungicidal finish to protect against mould infestation, the special silicone is also equipped with the environmentally safe OTTO Fungitect® silver technology. This ensures durable joints even in particularly stressed areas of hotels and spa facilities. In addition, OTTOSEAL® S 140 is compatible with natural stone and does not causes any marginal staining.

Fields of application

  • Special silicone for sealing and jointing in hygiene areas with high stress on the silicone joints, e.g. in wet rooms, in public shower and bathing areas, in swimming pool complexes/leisure centres, in stadiums, gymnasiums, hospitals, thermal baths, spa areas, hotel bathrooms, etc.
  • For jointing on ceramic tiles and natural stone in constantly wet areas
  • Sealing of swimming pools and -baths as well as elastic jointing on the pool edges
  • Sealing of expansion and connection joints in floor and wall areas

Characteristics

  • Highly active fungicide plus innovative OTTO Fungitect® Silver Technology - Double protection against mould infestation
  • Compatible with natural stone - Does not cause greasy deposits on natural stones
  • High resistance to notches and tearing - Resistant to high mechanical stresses
  • Excellent weathering, ageing and UV-resistance

Standards and tests

  • Tested according to EN 15651 – Part 1: F EXT-INT 25 LM / F EXT-INT CC 20 LM
  • Tested according to EN 15651 – Part 3: XS 1
  • Tested according to EN 15651 – Part 4: PW INT 12.5 E
  • Tested fire behaviour in accordance with EN 13501: class E
  • EMICODE® EC 1 Plus - very low emission
  • Quality seal of the IVD (Industrial association for sealants, registered society), tested by the ift Rosenheim (Institute of window engineering, registered society)
  • French VOC-emission class A+
  • Declaration in "baubook" Austria
  • According to regulation (EG) no. 1907/2006 (REACH)
  • Suitable for applications according to IVD instruction sheet no. 3-1+3-2+14+17+23+27+31+35 (IVD = German industry association sealants)

Colours & form of delivery

Farbtafel-OTTOSEAL-S-140---Teaser

Glossy colors

310 ml cartridge
adria blue
S140-04-C990
anthracite
S140-04-C67
grey
S140-04-C02
manhattan
S140-04-C43
sanitary grey
S140-04-C18
snow white
S140-04-C116
silk grey
S140-04-C77
Pieces per packaging unit 20
Pieces per pallet 1200

Due to typographical reasons the colours shown below may differ from the original colours of the products.

For an exact colour display please request our original colour charts.


Products, packaging Units and/or colours bearing order codes are available ex warehouse in standard commercial quantities.

Consumption calculator

Please note: This values are approximate and serve as a rough guide for rightangled joints. The depth of the joints is measured to the rear of the profile. Depending on the processing method, additional expenditure of up to 25% is possible.


More information

Do you have questions about our OTTOSEAL® sealants?

Our application consultation is available Monday to Thursday from 7:00 a.m. to 4:00 p.m. and Friday from 7:00 a.m. to 1:00 p.m. and will be happy to receive your request.